• -19% Minelab Gold Monster 1000

Minelab Gold Monster 1000

  • Pre-Order
  • Brands Minelab
  • Product Code: Minelab Gold Monster 1000
  • Product viewed: 15797
  • Special price:


    Old price:


    You save:



Minelab Gold Monster 1000


The GOLD MONSTER 1000 turns beginners into experts with fully automatic operation
in an easy-to-use, high performance detector.





The GOLD MONSTER 1000 comes with a choice of coils, battery options and shaft configurations.  If you are looking for a VERY easy to use prospecting detector that is super sensitive to gold at a great price - then this is the detector you've been waiting for!


  • Fully automatic operation
  • Extra sensitive 45 kHz VLF performance
  • Highly adaptable
  • 2 search coils included
  • Easy quick start


Did we mention that this detector is easy to use?   Check out the features on the control panel.   


 Gold Chance Indicator

High Gold Chance            

          Low Gold Chance        

 Detect Modes

Gold (Iron Reject)                  

         Deep All-Metal  

 Sensitivity Options


Manual sensitivity, and two
auto options; Auto, and Auto+.      

 Adjustable Volume


Adjust to suit your hearing, with 6
volume levels.      


As you can see, the Gold Monster 1000's controls are clear and easy to understand, and will give anyone the chance to find gold with ease!   


The 45 kHz Frequency advantage

Up until now, there has always been a compromise between frequency and sensitivity when optimising detector performance, because lower frequencies are more sensitive to larger gold nuggets and higher frequencies are more sensitive to smaller gold nuggets.


When comparing detectors, the three curves in the diagram represent each detector's ability to find small gold nuggets of a certain size, at a maximum possible depth. Most detectors will find a very large nugget just beneath the surface, however a detector's sensitivity to gold determines how many smaller nuggets will ultimately be recovered in difficult (noisy) ground at greater depths.

An 18 kHz detector will normally have a depth advantage on nuggets > 1.0g over a basic mid-frequency detector, and a 71 kHz detector will have a depth advantage on nuggets > 0.1g. The advanced GOLD MONSTER 1000 uses an intermediate 45 kHz frequency AND a high speed 24-bit signal processor. This primary combination greatly boosts sensitivity to gold beyond that of other single frequency VLF detectors over a wide range of nugget sizes, without introducing excess noise and false signals.

The GOLD MONSTER 1000 also has improved ferrous/non-ferrous discrimination and copes better with conductive (salty) soils than higher frequency detectors, making it the perfect choice to maximise your gold recovery!


​Be sure to check out the introduction video!


Full Specifications

Gold Prospecting
Key Technology
Ultra-wide dynamic range 45kHz VLF
Detect Modes
Gold (Iron reject), Deep All-Metal
Gold Chance Indicator (high/low)
Ground Balance
Automatic (Easy-Trak)
Noise Cancel
Automatic (On start-up)
Sensitivity Adjust
Manual (1-10), Auto (11), Auto+ (12)
Volume Adjust
Manual 1-6
Visual Display
Monochrome LCD
Detector Length
1382mm - 944mm (54.4"-37.2")
Detector Weight (with 10" — 6" coil)
1.33kg (2.94lbs) (excluding battery)
Audio Output
Internal speaker or headphones 3.5mm (1/8")
Coils (standard)
GM 10 (10" x 6" Double-D), GM 05 (5" Double-D)
Coils waterproof to 1m (3'), Control box rain/splash-proof
Battery options
Li-Ion (included), 8 AA Batteries (not included)
2 years control box & coil



What comes in the box

Most parts are available separately, please email us for more details if not found in other sections of the website.

Write a review

Note: HTML is not translated!
    Bad           Good