Coiltek 6" White's TDI Mono coil
Looking for a super sensitive sniper coil for your White's TDI? This is it!
Coiltek's lineup of coils have been popular for years on the Minelab GPX series detectors, now White's TDI users can enjoy the same type of balance, feel, and enhancement associated with Coiltek coils while using their detector of choice too! An entire series of coils has been developed which incorporate a new winding innovation which optimises the transmit and receive signals, therefore improving depth and sensitivity when compared to the standard wound coils available.
The entire series is branded with the well-known Coiltek terracotta colour. Each of the new coils will perform and give the detectorist a smooth stable operation with reduced noise from ground mineralisation and touch sensitivity.
The 6" White's TDI Mono coil we are featuring on this page would most commonly used for hunting heavy over growth and rocky conditions to find the finer gold on the patch. With excellent sensitivity and good depth for its size, capabilities it is an excellent choice for any detector operator. The size gives a relatively small view of the ground and it is because of this that they are most suited to the smaller targets.
Smaller coil = increased sensitivity to smaller targets. The round design makes target seperation very easy.
They are also excellent for maneuverability in obstacles as they are very light weight.
MONO Operation hints & tips:
The small mono has a depth benefit over most mono coils due to its size. This comes in the way of heightened sensitivity and less susceptibility to mineralisation. Again, the small field being produced reduces the ground noise to some degree however the coil is still a mono coil and this can cause some mineralised conditions to create ground balance issues. Having said that, the target response of this coil is sharp and clear so most likely the targets will be easily heard if within the range of the coils magnetic field.
Being a mono it has the windings around the perimeter of the coil so pinpointing can be done by either using the tip of the coil or tilting the coil to vertical and using the outer edge. You will notice that the outer edge is sensitive all around the coil. When swinging this coil you will need to overlap your swings by approximately half the coil length to be thorough and having a slow swing speed will ensure you hear the very tiny targets.
- Very light weight for all day use
- Fully Submersible
- Easy pinpointing due to the small size
- Ultra sensitive to small, closer to the surface targets
- Good depth capabilities for a small coil
- Extremely maneuverable in tight areas
- Robust design
- Easily carried in a backpack for use as a pinpoint coil.
- Size: 150 mm
- Weight: 517 / 18.2oz.
- Configuration: Monoloop (Mono)
Applicable White's Metal Detectors:
- White's TDI
- White's TDI Pro
Other White's TDI coil sizes available:
- 10" x 5" TDI Mono
- 11" TDI Mono
- 14" TDI Mono
- 17" x 11" TDI Mono
You can be assured of a high quality, high performing product that is backed up with great service, reliability and a 2 year warranty. Any WHITES TDI detector operator could be missing out on Optimising Discovery if they are not swinging a COILTEK.
Write a reviewYour Name:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: