Doc's Detecting 28" lower shafts
Will also work with the Minelab Sovereign, Eureka Gold, and Excalibur series as well!
Doc has developed a heavy duty fiberglass lower rod for the Minelab SD/GP/GPX series of detectors. These rods are stronger due to being both glued and pinned at the shaft end. They are also 4" longer than the stock Minelab rod - which gets the coil just a little further away from any other metal that you may be carrying with you. Comes with the bolt, nut and two washers.
Write a reviewYour Name:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: