Coiltek 17" x 11" Elite coil
The larger of the two Elliptical shapes in the ELITE series and an excellent choice for patch finding. Easily maneuvered in tight situations to increase pinpointing ability. A favourite coil amongst elliptical coil fans.
MONO coil general operation hints & tips
The MONO coil has also been one of the most popular coils we have produced as this coil was first introduced to the detecting community when the SD2100’s were released. It has superb sensitivity and depth capabilities and when swung close to the ground and at a slow speed it has the ability to find sub-gram nuggets at depth and also the larger ounce pieces at great depths. Being a mono coil it is better suited to the low to no mineralization areas for the SD and GP machines however since the introduction of the new GPX series detectors from Minelab these are being used in the high mineralised with great success. Its ability to pinpoint small targets is easy as the outer perimeter of the coil is its main sensitive area so the closer to the coil the target is the response is more to the outside of the coil. If tilted to one side when trying to locate a target in a dig hole pile it will ensure you get an accurate location quickly. Remember to overlap your swings with a MONO by at least half a coil to ensure you do not miss any targets.
Coiltek's Elite Advantage
However the Coiltek ELITE series utilise a new winding innovation which was engineered and produced by COILTEK. This new winding optimises the transmit and receive signals, therefore improving depth and sensitivity when compared to a standard wound similar sized coil of up to an extra 30%.
With a brand new camouflage look these coils give the detectorist smooth stable operation and no abnormal external interference issues. The series perform smoother than any other standard coil on the market.
Any detector operator with a SD/GP/GPX machine could be missing out on Optimising Discovery if they are not swinging with the ELITE.
General design characteristics:
- Excellent overall performance
- Excellent ground coverage
- Easy handling in open ground
- Very Good pointing capability
- Excellent sensitivity and depth
- Robust coil design
- Size: 440mm x 285 mm ( 17" x 11")
- Weight: 1076g / 37.9oz
- Configuration: Elite Mono
- Color: Camo
Applicable metal detectors
- Minelab SD series
- Minelab GP series
- Minelab GPX series
Other Elite coil sizes available:
- 11" Elite
- 14" Elite
- 14" x 9" Elite
- 18" Elite
Write a reviewYour Name:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: